To assign each departments with different IP subnet you have to use Layer 3 device. In Packet Tracer Router DHCP Example, we will focus, DHCP Configuration with Packet Tracer.We will learn How to Configure DHCP Server and ip helper command. This is COMPULSORY, IF NOT YOUR DEMOSTRATION IS FAILED. Simulate frame/message movement to show the connection among users and servers.ĭuring demostration you have to present the complete logical design. Make sure all users can connect to each others within same subnet and different subnet.
If you select Yes on this screen, the Cisco router will ask you step-by-step to make basic settings. Step 2 In the Router0 window, click the CLI command prompt tab and in the initial configuration screen, type No and press Enter. Make sure all servers are running only their own service and assign IP address as static. First, create a network topology with two separate segments (192.168.1./24 and 192.168.2./24) in Packet Tracer. In your design you can use several users/PCs when testing the connection.Īssign IP address dynamically to all users for each departments.ĭemo and simulate your lab based on your logical design. You need to culculate the IP subnetting based on the requirements. Make sure there is no conflict IP range when you assign to each departments.ĭesign a logical diagram using Packet Tracer 5.3 to show the whole figure of LAN connectivity with the correct IP scheming.
The network administrator decided to use IP address class B is 172.16.0.0/16 to assign to all departments. Steps We first exclude addresses that are already being used or reserved for another purpose. At this stage the researcher configures the VLAN and DHCP on the router and server using Cisco Packet. Server Farm has web server, FTP server, DNS server and Mail server. You can easily configure DHCP by following these steps. You are required to culculate subnetting based on VLSM.
You need to setup LAN connection using subnetting by identifying appropriate IP scheme to assign to all users.
0 kommentar(er)
